The Blaicher B-38 was a Polish, single seat sailplane completed in 1938. Notable for its use of long span Fowler flaps, its development was ended by the German invasion of Poland in September 1939.
Blaicher B-38 | |
---|---|
Role | High performance, single seat, experimental sailplane |
National origin | Poland |
Manufacturer | ZASPL |
Designer | Michal Blaicher |
First flight | Late 1938 or early 1939 |
Number built | 1 |
Following the WOS-37, his development of the Czerwiński CW 5 bis, Michal Blaicher turned to a new design incorporating Fowler flaps. Construction began in the ZASPL workshops but moved when ZASPL became LWL, controlled by PWS, delaying its completion.[1] Its first flight was made either late in 1938[1] or in the spring of 1939 at Lwów-Skiłnów,[2] flown by Zbigniew Źabski. After some modifications it was ready for official testing in August 1939 but was destroyed in the German invasion the following month.[1][2]
The all-wood B-38 had a cantilever gull wing built around two spars and covered with stress-relieving plywood. The mass balanced ailerons were assisted by Flettner tab and, inboard of them, Fowler flaps filled the remaining 2/3 of the span.[1]
The glider's fuselage was a ply-covered, semi-monocoque structure of oval cross-section. Its single seat cockpit, which included blind flying instrumentation, was enclosed and had a long dorsal fairing behind it. At the rear the cantilever tailplane was mounted above the fuselage on the fin; like the ailerons the elevators were tab assisted. Fixed empennage surfaces were ply-covered and the control surfaces fabric-covered.[1][2]
A detachable, two-wheeled trolley was used for take-off and a sprung skid for landings.[1]
Data from J, Cynk (1971),[1] except where noted. Performance from samolotypolskie[2]
General characteristics
Performance
Related lists
![]() |
Wikimedia Commons has media related to B-38 (glider). |