The ATEC 122 Zephyr 2000 is a Czech ultralight aircraft, designed by Oldrich Olansky and produced by ATEC v.o.s. of Libice nad Cidlinou. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.[2][3][4][5]
The Zephyr was designed to comply with the Fédération Aéronautique Internationale microlight rules. It features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear, a T-tail and a single engine in tractor configuration.[2][3][4]
The aircraft's fuselage is made from composites with wooden bulkheads. The semi-tapered 9.6m (31.5ft) span wing is made from plywood with composite spars and leading edges and employs a UA-2 airfoil. The wing is covered with doped aircraft fabric. The standard engine factory-supplied was the 100hp (75kW) Rotax 912ULS four-stroke powerplant.[2][3][4][5]
The Zephyr is noted for its low payload. With a useful load of 197.5kg (435lb) and full fuel of 43kg (95lb), this leaves only 154.3kg (340lb) for occupants and baggage.[2][3][4]
Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.
2019-2025 WikiSort.org - проект по пересортировке и дополнению контента Википедии