avia.wikisort.org - Aeroplane

The Canadian Vickers Vancouver was a Canadian transport/patrol flying boat of the 1930s built by Canadian Vickers.

Vancouver
Role	Transport/patrol flying boat Type of aircraft
Manufacturer	Canadian Vickers
First flight	1929
Retired	1940
Status	out of service
Primary user	RCAF
Produced	6

It was a twin-engine, equal-span biplane. The hull was of metal and the rest of the structure of fabric-covered wood.

Development

The Vancouver was developed as a replacement for the Varuna in response to a Royal Canadian Air Force requirement for a flying boat to transport men and equipment to forest fires. The main difference from the Varuna was a duralumin hull and more powerful engines. The two flight crew were located in two tandem open cockpits, forward of the wing. The main cabin could accommodate a firefighting team of six men and all the required equipment. Five aircraft were delivered to the Royal Canadian Air Force, one was later converted into a coastal patrol aircraft.[1]

Operational history

In the mid-1930s, the Vancouvers were modified as coastal patrol aircraft by the installation of machine guns and bombs.

After the outbreak of the Second World War, Vancouvers served with 4 Squadron, RCAF at Jericho Beach Air Station until withdrawn from service in 1940. After a brief period of service in training duties, they were finally withdrawn and struck off in 1940.

None of the aircraft saw service after 1940, one private offer to acquire was denied.[2]

Variants

Data from:Canadian Aircraft since 1909[1]

• Vancouver I – prototype with Armstrong Siddeley Lynx IV engines, one built.
• Vancouver IA – designation of prototype after installation of Armstrong Siddeley Lynx IVC engines.
• Vancouver II – production transport version with Armstrong Siddeley Lynx IVC (three aircraft) or Wright J-6 Whirlwind (two aircraft) engines, five built.
• Vancouver IIS/S – conversion of three Lynx-powered Vancouver IIs to "service standard" with three Lewis gun cockpits for coastal patrol, powered by Armstrong Siddeley Serval IV engines.
• Vancouver IIS/W – "service standard" conversion of two Wright J-6 Whirlwind powered Vancouver IIs.

Operator

 Canada

Royal Canadian Air Force

• • No. 4 Squadron RCAF 1939-1940

Specifications (Vancouver IIS/W)

Data from Canadian aircraft since 1909,[1] Jane's all the World's Aircraft 1931[3]

General characteristics

• Crew: 9 (2 crew in civil versions)
• Capacity: (7 pax in civil versions)
• Length: 37 ft 6 in (11.43 m)
• Wingspan: 55 ft 0 in (16.76 m)
• Height: 15 ft 7 in (4.75 m)
• Wing area: 772 sq ft (71.7 m²)
• Airfoil: Clark Y
• Empty weight: 5,159 lb (2,340 kg)
• Gross weight: 7,606 lb (3,450 kg)
• Powerplant: 2 × Wright J-6 Whirlwind 9-cyl. air-cooled radial piston engine, 300 hp (220 kW) each
• Propellers: 2-bladed Standard steel fixed-pitch propellers

Performance

• Maximum speed: 94 mph (151 km/h, 82 kn)
• Cruise speed: 86 mph (138 km/h, 75 kn) *Alighting speed: 45 mph (39 kn; 72 km/h)
• Service ceiling: 15,000 ft (4,600 m) plus
• Rate of climb: 565 ft/min (2.87 m/s)

Armament

• Guns: 3 x 0.303 in (7.70 mm) Lewis Guns (military Vancouvers only)
• Bombs: 1,000 lb (450 kg) of bombs (military Vancouvers only)

See also

Related lists

• List of aircraft of World War II
• List of flying boats and floatplanes
• List of interwar military aircraft

References

На других языках

---

- [en] Canadian Vickers Vancouver

---

[it] Canadian Vickers Vancouver

Il Canadian Vickers Vancouver fu un idrovolante da ricognizione e trasposto biplano e biposto sviluppato dall'azienda aeronautica canadese Canadian Vickers Limited negli anni trenta del XX secolo, e prodotto in piccola serie.

---

---