The Howard 500 is an American executive transport aircraft produced by Howard Aero Incorporated during the early 1960s.
Howard 500 | |
---|---|
![]() | |
Howard 500 N500LN demonstrating at Coventry airport, UK, in August 2000 | |
Role | Executive aircraft Type of aircraft |
National origin | United States |
Manufacturer | Howard Aero Incorporated |
Designer | Dee Howard[n 1] and Ed Swearingen |
First flight | September 1959 |
Number built | 22 |
During the 1950s and '60s, Howard Aero Inc., led by Durrell U. "Dee" Howard,[n 1] had been remanufacturing military surplus Lockheed Lodestars and Lockheed Venturas for the executive market. Conversions of multi-engine World War II warplanes into business aircraft were popular at the time, and Howard came to prefer Lockheed designs, as he found heavy transports such as the C-47 to be too slow and light bombers such as the Douglas A-26 lacking in interior space.[1]
While the Howard 500 bears a strong resemblance to the Lodestar and Ventura, it is a substantially new design with a completely new fuselage designed from the outset for pressurization, unlike those of its Lockheed forebears.[1] The only major components taken directly from the Lockheeds were the outer wing panels (from surplus Venturas) and undercarriage (from PV-2 Harpoons). Howard purchased wing and fuselage jigs from Lockheed to use as patterns for jigs for the new aircraft, while the wings were designed wet. The pressurization system maintained a differential of 46.5 kilopascals (6.75 psi) which was greater than any other prop or turboprop executive aircraft on the market at the time and maintained a sea level cabin pressure at up to 16,000 feet (4,900 m).[2] The 500 is a luxurious aircraft with a spacious cabin, ample baggage capacity, a large door situated close to the ground for easy entry, and an onboard toilet.[1]
The engine chosen was a new, higher-power and lighter-weight version of the Pratt & Whitney R-2800 that had been developed for the Douglas DC-6. Propeller hubs were taken from F4U Corsairs, four-blade propellers and spinners from DC-7s. The Howard 500 could accommodate 10 to 14 passengers with a large window for each. Increased fuel tankage over the PV-2 Ventura gave a maximum range with full reserves of 2,600 miles (4,200 km). Maximum cruising speed was 350 mph (300 kn; 560 km/h) at 21,000 feet (6,400 m).[citation needed]
The prototype flew in September 1959, and type certification was achieved on February 20, 1963.[3] However, by the mid 1960s, turboprops and business jets with tricycle landing gear were being introduced by major manufacturers; while the Howard 500 compared favorably with these aircraft in terms of speed and range, it was an anachronistic taildragger with piston engines, resulting in limited sales.[1]
Twenty-two Howard 500s were produced initially, with a further eight being converted from earlier PV-2s to virtually the same standard.[4]
Commercial firms operating the aircraft included: Republic Steel, Green Construction of Indiana, KF Airlines, Pacific Petroleums of Canada, Northern Natural Gas Company and U.S. Metal Refining Company.[5]
Of the 17 examples built to the full Howard 500 standard, two restored aircraft remained flying in 2019: aircraft registration N500HP (serial number 500-105,[6]) and N500LM, both owned by TP Aero and based in Anoka, Minnesota.[1]
Data from Jane's All The World's Aircraft 1965-66 [3]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Lockheed Model 10 Electra family | |||||||
---|---|---|---|---|---|---|---|
Model numbers | |||||||
Civilian names |
| ||||||
Military designations | |||||||
Japanese variants |
| ||||||
Notable aircraft | |||||||
Topics |
|