avia.wikisort.org - Engine

The Lorraine 14A Antarès was a French 14-cylinder radial aero engine built and used in the 1930s. It was rated in the 370 kW (500 hp) range.

14A Antarès
14E
Type	14-cylinder air-cooled radial aircraft engine
National origin	France
Manufacturer	Société Lorraine, Argenteuil, Paris
Variants	Lorraine Sirius

Design and development

The Antarès was a conventionally laid out radial engine, with 14 cylinders in two rows. The crankcase was a barrel-shaped aluminium alloy casting, with an internal integral diaphragm which held the front crankshaft bearing. Forward of the diaphragm there was an integrally cast cam-gear case for the double track cam-rings. The reduction gear was housed under a domed casing attached to the front of the crankcase.

Flange-mounted steel barrels were bolted to the crankcase and enclosed with cast aluminium alloy, screwed-on, cylinder heads with integral cooling fins. The pistons were also made of aluminium alloy and had floating gudgeon pins. The fourteen pistons drove the double throw crankshaft via two channel-section master rods and twelve circular section auxiliary rods. The master rod had an integral, split type big-end. The crankshaft was machined from a single forging, with bolt-on balance weights.

The Antarès had a single pair of overhead inlet and exhaust valves per cylinder. The cam-rings drove roller tappets, mounted in the cam-case, which in turn operated rocker arms, fitted with ball bearings, via pushrods. The cam-rings were concentric with the crankshaft and driven via epicyclic gears. Most Antarès were conventionally aspirated via a single carburettor.

Variants

14A

14Ac

14E

14L

Specifications

Data from Societe Generale Aeronautique[1]

General characteristics

• Type: 14-cylinder two-row radial piston engine
• Bore: 140 mm (5.51 in)
• Stroke: 150 mm (5.91 in)
• Displacement: 32.326 l (1,972.7 cu in)
• Length: 1,424 mm (56.06 in) - direct drive, 1,552 mm (61.10 in) - reduction gear
• Diameter: 1,240 mm (48.82 in)
• Dry weight: complete 448 kg (988 lb) - direct drive, 487 kg (1,074 lb) - reduction gear

Components

• Valvetrain: one inlet and one exhaust overhead valve per cylinder, operated with rocker arms, pushrod driven via roller tappets bearing on a double track cam-ring
• Fuel system: dual 75 mm (2.95 in) Zenith carburettors
• Fuel type: petrol
• Cooling system: air-cooled
• Reduction gear: 0.647:1

Performance

• Power output: 370 kW (500 hp) at 1900 rpm
• Compression ratio: 5:1
• Specific fuel consumption: 0.311 kg/kW/hr (0.511 lb/hp/hr)
• Oil consumption: 0.016 kg/kW/hr (0.026 lb/hp/hr)

References

• Revue de la Societe Generale Aeronautique (PDF) (in French). Paris: Societe Generale Aeronautique. November 1932. pp. 28–30. Retrieved 12 October 2014.

---