avia.wikisort.org - AeroplaneThe RagWing RW11 Rag-A-Bond is a two-seat, high wing, strut-braced, conventional landing gear, single engine homebuilt aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.[1][2][3][4]
| RagWing RW11 Rag-A-Bond |
|---|
| Role |
Homebuilt aircraft Type of aircraft |
| National origin |
United States |
| Manufacturer |
Ragwing Aircraft Designs |
| Designer |
Roger Mann |
| First flight |
1996 |
| Introduction |
1996 |
| Status |
Plans available |
| Number built |
4 (1998) |
The RW11 is a replica of the Piper PA-15 Vagabond.[1][2][3]
Design and development
The RW11 was designed for the US experimental homebuilt aircraft category or as a US FAR 103 Ultralight Vehicles two-seat ultralight trainer and first flown in 1996.[1][2][3]
The airframe is constructed entirely from wood and covered with aircraft fabric. The landing gear is of conventional configuration with bungee suspension. The cabin is internally 42 in (107 cm) wide and drooped STOL style wingtips are optional. The aircraft's installed power range is 52 to 100 hp (39 to 75 kW) and the standard engine is the 52 hp (39 kW) Rotax 503, although the 70 hp (52 kW) 2si 690 and 73 hp (54 kW) Subaru EA-81 engines have also been used.[1][2][3]
The RW11 is only offered as plans and the designer estimates it will take 500 hours to complete the aircraft.[1][2][3][4]
Specifications (RW11)
Data from Kitplanes, Purdy and RagWing[1][2][3]
General characteristics
- Crew: one
- Capacity: one passenger
- Length: 18 ft 0 in (5.49 m)
- Wingspan: 28 ft 0 in (8.53 m)
- Height: 6 ft 6 in (1.98 m)
- Wing area: 123.8 sq ft (11.50 m2)
- Empty weight: 420 lb (191 kg)
- Gross weight: 850 lb (386 kg)
- Fuel capacity: 10 US gallons (38 litres)
- Powerplant: 1 × Rotax 503 twin cylinder two stroke aircraft engine, 52 hp (39 kW)
- Propellers: 2-bladed wooden
Performance
- Cruise speed: 78 mph (126 km/h, 68 kn)
- Stall speed: 38 mph (61 km/h, 33 kn)
- Never exceed speed: 115 mph (185 km/h, 100 kn)
- Range: 280 mi (450 km, 240 nmi)
- Service ceiling: 9,500 ft (2,900 m)
- Rate of climb: 525 ft/min (2.67 m/s)
Aircraft of comparable role, configuration, and era
References
- Downey, Julia: 1999 Plans Aircraft Directory, Kitplanes, Volume 16, Number 1, January 1999, page 66. Primedia Publications. ISSN 0891-1851
- Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 235. BAI Communications. ISBN 0-9636409-4-1
- RagWing Aircraft Designs (2006). "RW11 RagWing Rag-A-Bond". Retrieved 6 January 2011.
- RagWing Aircraft Designs (2006). "RagWing Price List". Retrieved 29 December 2010.
External links
На других языках
- [en] RagWing RW11 Rag-A-Bond
[fr] RagWing RW11 Rag-A-Bond
Le RagWing RW11 Rag-A-Bond est un avion léger monoplan biplace en kit, à aile haute renforcée et train d'atterrissage conventionnel, conçu par Roger Mann et vendu sous forme de plans par la société américaine RagWing Aircraft Designs (en) pour la construction amateur[1],[2],[3],[4].
Текст в блоке "Читать" взят с сайта "Википедия" и доступен по лицензии Creative Commons Attribution-ShareAlike; в отдельных случаях могут действовать дополнительные условия.
Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.
2019-2025
WikiSort.org - проект по пересортировке и дополнению контента Википедии