The General Electric YJ93 turbojet engine was designed as the powerplant for both the North American XB-70 Valkyrie bomber and the North American XF-108 Rapier interceptor. The YJ93 was a single-shaft axial-flow turbojet with a variable-stator compressor and a fully variable convergent/divergent exhaust nozzle. The maximum sea-level thrust was 28,800lbf (128kN).[1]
The YJ93 started life as the General Electric J79-X275, an enlarged version of the General Electric J79 turbojet with "275" meaning Mach 2.75, the engine's target operating speed.[2] This design evolved into the X279 when Mach 3 cruise became a requirement, and ultimately became the YJ93.[3]
The engine used a special high-temperature JP-6 fuel. The six YJ93 engines in the XB-70 Valkyrie were capable of producing a thrust to weight ratio of 5:1 allowing for a speed of 2,000mph (3,200km/h) (approximately Mach 3) at an altitude of 70,000 feet (21,000m).[4] The first engine went on test in September 1958 and featured advanced technology achievements such as electrolytically drilling longitudinal air cooling holes in the turbine blades.[2]
The XF-108 interceptor was cancelled outright, and the B-70 project was re-oriented to a research project only.[5]
Jenkins, Dennis R.; Landis, Tony (2002). North American XB-70A Valkyrie. North Branch [USA]: Specialty Press Publishers and Wholesalers. ISBN1-58007-056-6.
Eight Decades of Progress: A Heritage of Aircraft Turbine Technology. GE Aircraft Engines. 1990. p.117. LCCN90082948.
Jenkins, Dennis R. and Tony R. Landis. Valkyrie: North American's Mach 3 Superbomber. North Branch, Minnesota: Specialty Press, 2005. ISBN1-58007-072-8.
Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.
2019-2025 WikiSort.org - проект по пересортировке и дополнению контента Википедии